[frers-list]Re: frers-list digest, Vol 1 #252 - 2 msgs
frers-list@lists.frers33.com
frers-list@lists.frers33.com
Fri, 18 May 2007 05:28:31 +0000
--NextPart_Webmail_9m3u9jl4l_12647_1179466111_0
Content-Type: text/plain
Content-Transfer-Encoding: 8bit
Bill,
I replaced my tiller three years ago and got it from H&L Marine woodwork. You can contat them at 323-636-1718, or at 2965 East Harcourt, Racho Dominguez, CA 90221. No website listed, but I know they are there because I talked with them last week about some winch pads.
The dimensions I used in ordering my tiller were;
Overall length 53"
Rise in bend 7.5"
Thickness of stock 2-5/8"
Width of stock 3-1/8"
Style of stock from their book "G"
They charged me $71.00 at the time and I think that included shipping. The tiller itself seemed beefier than the one it replaced but you can't beat the price. Ask them to fax you the ordering info and double check my dimensions against yours, but the one they provided fit exactly.
We miss you out here on Lake Michigan. Its lonely with only two of us!
Frank Wittosch
Pepperke 2.0
-------------- Original message --------------
From: frers-list-request@lists.frers33.com
> Send frers-list mailing list submissions to
> frers-list@lists.frers33.com
>
> To subscribe or unsubscribe via the World Wide Web, visit
> http://lists.frers33.com/mailman/listinfo/frers-list
> or, via email, send a message with subject or body 'help' to
> frers-list-request@lists.frers33.com
>
> You can reach the person managing the list at
> frers-list-admin@lists.frers33.com
>
> When replying, please edit your Subject line so it is more specific
> than "Re: Contents of frers-list digest..."
>
>
> Today's Topics:
>
> 1. Tiller dimensions (William Rusconi)
> 2. Re: Tiller dimensions (Arthur Kelley)
>
> --__--__--
>
> Message: 1
> Date: Thu, 17 May 2007 17:12:24 -0600
> From: "William Rusconi"
> To: frers-list@lists.frers33.com
> Subject: [frers-list]Tiller dimensions
> Reply-To: frers-list@lists.frers33.com
>
> This is a multi-part message in MIME format.
>
> ------_=_NextPart_001_01C798D8.D63F939A
> Content-Type: text/plain;
> charset=us-ascii
> Content-Transfer-Encoding: quoted-printable
>
> Has anyone had to replace a tiller? I looked at West Marine's site but
> concluded that custom is the only option. Any idea on where I could
> find someone who had done these for the Frers 33?
>
> =20
>
> Bill Rusconi
>
> Impetuous
>
> USA 51284
>
> =20
>
> Park City, UT
>
> =20
>
>
> ------_=_NextPart_001_01C798D8.D63F939A
> Content-Type: text/html;
> charset=us-ascii
> Content-Transfer-Encoding: quoted-printable
>
> > xmlns:w=3D"urn:schemas-microsoft-com:office:word" =
> xmlns:st1=3D"urn:schemas-microsoft-com:office:smarttags" =
> xmlns=3D"http://www.w3.org/TR/REC-html40">
>
>
> > charset=3Dus-ascii">
>
> > namespaceuri=3D"urn:schemas-microsoft-com:office:smarttags"
> name=3D"country-region"/>
> > namespaceuri=3D"urn:schemas-microsoft-com:office:smarttags"
> name=3D"place"/>
>
>
>
>
>
>
>
>
>
>
>
>
> style=3D'font-size:10.0pt;
> font-family:Arial'>Has anyone had to replace a tiller? I looked at =
> West Marine’s
> site but concluded that custom is the only option. Any idea on =
> where I could
> find someone who had done these for the Frers =
> 33?
>
>
> style=3D'font-size:10.0pt;
> font-family:Arial'>
>
>
> face=3DArial>> style=3D'font-size:10.0pt;font-family:Arial;color:navy;font-style:italic'=
> >Bill
> Rusconi
>
>
> face=3DArial>> style=3D'font-size:10.0pt;font-family:Arial;color:navy;font-style:italic'=
> >Impetuous
>
>
> w:st=3D"on">> size=3D2 color=3Dnavy face=3DArial>> style=3D'font-size:10.0pt;font-family:Arial;
> =
> color:navy;font-style:italic'>USA> try-region>> color=3Dnavy face=3DArial>> style=3D'font-family:Arial;color:navy;font-style:
> italic'> 51284
>
>
> face=3DArial>> style=3D'font-size:10.0pt;font-family:Arial;color:navy;font-style:italic'=
> >
>
>
> face=3DArial>> style=3D'font-size:10.0pt;font-family:Arial;color:navy;font-style:italic'=
> >Park
> City, UT
>
>
> style=3D'font-size:
> 12.0pt'>
>
>
>
>
>
>
>
> ------_=_NextPart_001_01C798D8.D63F939A--
>
>
> --__--__--
>
> Message: 2
> Date: Thu, 17 May 2007 22:24:36 -0400
> From: Arthur Kelley
> Subject: Re: [frers-list]Tiller dimensions
> To: frers-list@lists.frers33.com
> Reply-To: frers-list@lists.frers33.com
>
> This is a multi-part message in MIME format.
>
> --Boundary_(ID_CZCjynwWQ/pl6UIRGZDezA)
> Content-type: text/plain; charset=iso-8859-1
> Content-transfer-encoding: 7BIT
>
> Bill,
>
> I was directed to Karl's Boat Shop in MA. I ended up replacing the entire
> assembly with a wheel (reverting back to a wheel actually), but I was told that
> Karl's was the source of the after-market tiller that came with my boat.
>
> http://www.karlsboatshop.com/tillerform.html
>
> Let us know how you make out.
>
> Art Kelley
> "Brilliant"
> ----- Original Message -----
> From: William Rusconi
> To: frers-list@lists.frers33.com
> Sent: Thursday, May 17, 2007 7:12 PM
> Subject: [frers-list]Tiller dimensions
>
>
> Has anyone had to replace a tiller? I looked at West Marine's site but
> concluded that custom is the only option. Any idea on where I could find
> someone who had done these for the Frers 33?
>
>
>
> Bill Rusconi
>
> Impetuous
>
> USA 51284
>
>
>
> Park City, UT
>
>
>
> --Boundary_(ID_CZCjynwWQ/pl6UIRGZDezA)
> Content-type: text/html; charset=iso-8859-1
> Content-transfer-encoding: quoted-printable
>
>
> > "urn:schemas-microsoft-com:office:office" xmlns:w =3D=20
> "urn:schemas-microsoft-com:office:word" xmlns:st1 =3D=20
> "urn:schemas-microsoft-com:office:smarttags">
> > charset=3Diso-8859-1">
> > name=3DGENERATOR>> name=3D"country-region"=20
> namespaceuri=3D"urn:schemas-microsoft-com:office:smarttags">> ype>> name=3D"place"=20
> namespaceuri=3D"urn:schemas-microsoft-com:office:smarttags">> ype>
>
>
>
>
>
>
Bill,
>
>
I was directed to Karl's Boat Shop in =
> MA. I=20
> ended up replacing the entire assembly with a wheel (reverting back to a =
> wheel=20
> actually), but I was told that Karl's was the source of the after-market =
> tiller=20
> that came with my boat.
>
>
> href=3D"http://www.karlsboatshop.com/tillerform.html">http://www.karlsboa=
> tshop.com/tillerform.html
>
>
Let us know how you make =
> out.
>
>
Art Kelley
>
"Brilliant"
>
> style=3D"PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: 5px; =
> BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: 0px">
>
----- Original Message -----
> > style=3D"BACKGROUND: #e4e4e4; FONT: 10pt arial; font-color: =
> black">From:=20
> > href=3D"mailto:wrusconi@myriad.com">William=20
> Rusconi
>
To: > title=3Dfrers-list@lists.frers33.com=20
> =
> href=3D"mailto:frers-list@lists.frers33.com">frers-list@lists.frers33.com=
> =20
>
>
Sent: Thursday, May 17, 2007 =
> 7:12=20
> PM
>
Subject: [frers-list]Tiller=20
> dimensions
>
>
>
> style=3D"FONT-SIZE: 10pt; FONT-FAMILY: Arial">Has anyone had to =
> replace a=20
> tiller? I looked at West Marine=92s site but concluded that =
> custom is the=20
> only option. Any idea on where I could find someone who had done =
> these=20
> for the Frers 33?
>
> style=3D"FONT-SIZE: 10pt; FONT-FAMILY: =
> Arial">
>
> size=3D2>> style=3D"FONT-SIZE: 10pt; COLOR: navy; FONT-STYLE: italic; =
> FONT-FAMILY: Arial">Bill=20
> Rusconi
>
> size=3D2>> style=3D"FONT-SIZE: 10pt; COLOR: navy; FONT-STYLE: italic; =
> FONT-FAMILY: Arial">Impetuous
>
> w:st=3D"on">> style=3D"FONT-SIZE: 10pt; COLOR: navy; FONT-STYLE: italic; =
> FONT-FAMILY: =
> Arial">USA> face=3DArial color=3Dnavy>> style=3D"COLOR: navy; FONT-STYLE: italic; FONT-FAMILY: Arial">=20
> 51284
>
> size=3D2>> style=3D"FONT-SIZE: 10pt; COLOR: navy; FONT-STYLE: italic; =
> FONT-FAMILY: Arial">
>
> size=3D2>> style=3D"FONT-SIZE: 10pt; COLOR: navy; FONT-STYLE: italic; =
> FONT-FAMILY: Arial">Park=20
> City, UT
>
> style=3D"FONT-SIZE: =
> 12pt">
> >
>
> --Boundary_(ID_CZCjynwWQ/pl6UIRGZDezA)--
>
>
> --__--__--
>
> _______________________________________________
> frers-list mailing list
> frers-list@lists.frers33.com
> http://lists.frers33.com/mailman/listinfo/frers-list
>
>
> End of frers-list Digest
--NextPart_Webmail_9m3u9jl4l_12647_1179466111_0
Content-Type: text/html
Content-Transfer-Encoding: 8bit
<html><body>
<DIV>Bill,</DIV>
<DIV>I replaced my tiller three years ago and got it from H&L Marine woodwork. You can contat them at 323-636-1718, or at 2965 East Harcourt, Racho Dominguez, CA 90221. No website listed, but I know they are there because I talked with them last week about some winch pads.</DIV>
<DIV>The dimensions I used in ordering my tiller were;</DIV>
<DIV> </DIV>
<DIV>Overall length 53"</DIV>
<DIV>Rise in bend 7.5"</DIV>
<DIV>Thickness of stock 2-5/8"</DIV>
<DIV>Width of stock 3-1/8"</DIV>
<DIV>Style of stock from their book "G"</DIV>
<DIV>They charged me $71.00 at the time and I think that included shipping. The tiller itself seemed beefier than the one it replaced but you can't beat the price. Ask them to fax you the ordering info and double check my dimensions against yours, but the one they provided fit exactly. </DIV>
<DIV> </DIV>
<DIV>We miss you out here on Lake Michigan. Its lonely with only two of us!</DIV>
<DIV>Frank Wittosch</DIV>
<DIV>Pepperke 2.0</DIV>
<BLOCKQUOTE style="PADDING-LEFT: 5px; MARGIN-LEFT: 5px; BORDER-LEFT: #1010ff 2px solid">-------------- Original message -------------- <BR>From: frers-list-request@lists.frers33.com <BR><BR>> Send frers-list mailing list submissions to <BR>> frers-list@lists.frers33.com <BR>> <BR>> To subscribe or unsubscribe via the World Wide Web, visit <BR>> http://lists.frers33.com/mailman/listinfo/frers-list <BR>> or, via email, send a message with subject or body 'help' to <BR>> frers-list-request@lists.frers33.com <BR>> <BR>> You can reach the person managing the list at <BR>> frers-list-admin@lists.frers33.com <BR>> <BR>> When replying, please edit your Subject line so it is more specific <BR>> than "Re: Contents of frers-list digest..." <BR>> <BR>> <BR>> Today's Topics: <BR>> <BR>> 1. Tiller dimensions (William Rusconi) <BR>> 2. Re: Tiller dimensions (Arthur Kelley) <BR>> <BR>> --__--__-- <BR>> <BR>> Message: 1 <BR>> D
ate: Thu, 17 May 2007 17:12:24 -0600 <BR>> From: "William Rusconi" <WRUSCONI@MYRIAD.COM><BR>> To: frers-list@lists.frers33.com <BR>> Subject: [frers-list]Tiller dimensions <BR>> Reply-To: frers-list@lists.frers33.com <BR>> <BR>> This is a multi-part message in MIME format. <BR>> <BR>> ------_=_NextPart_001_01C798D8.D63F939A <BR>> Content-Type: text/plain; <BR>> charset=us-ascii <BR>> Content-Transfer-Encoding: quoted-printable <BR>> <BR>> Has anyone had to replace a tiller? I looked at West Marine's site but <BR>> concluded that custom is the only option. Any idea on where I could <BR>> find someone who had done these for the Frers 33? <BR>> <BR>> =20 <BR>> <BR>> Bill Rusconi <BR>> <BR>> Impetuous <BR>> <BR>> USA 51284 <BR>> <BR>> =20 <BR>> <BR>> Park City, UT <BR>> <BR>> =20 <BR>> <BR>> <BR>> ------_=_NextPart_001_01C798D8.D63F939A <BR>> Content-Type: text/html; <BR>> charset=us-a
scii <BR>> Content-Transfer-Encoding: quoted-printable <BR>> <BR>> > xmlns:w=3D"urn:schemas-microsoft-com:office:word" = <BR>> xmlns:st1=3D"urn:schemas-microsoft-com:office:smarttags" = <BR>> xmlns=3D"http://www.w3.org/TR/REC-html40"> <BR>> <BR>> <BR>>
<META http-equiv='3D"Content-Type"' content='3D"text/html;' ="<BR">> charset=3Dus-ascii"> <BR>>
<META content='3D"Microsoft' name=3DGenerator medium)? (filtered 11 Word><BR>> <o:SmartTagType ="<BR">> namespaceuri=3D"urn:schemas-microsoft-com:office:smarttags" <BR>> name=3D"country-region"/> <BR>> <o:SmartTagType ="<BR">> namespaceuri=3D"urn:schemas-microsoft-com:office:smarttags" <BR>> name=3D"place"/> <BR>> <BR>>
<STYLE>
<BR>> st1\:*{behavior:url(#default#ieooui) }
<BR>> </STYLE>
<BR>> <BR>>
<STYLE>
<BR>> <!--
<BR>> /* Style Definitions */
<BR>> p.MsoNormal, li.MsoNormal, div.MsoNormal
<BR>> {margin:0in;
<BR>> margin-bottom:.0001pt;
<BR>> font-size:12.0pt;
<BR>> font-family:"Times New Roman";}
<BR>> a:link, span.MsoHyperlink
<BR>> {color:blue;
<BR>> text-decoration:underline;}
<BR>> a:visited, span.MsoHyperlinkFollowed
<BR>> {color:purple;
<BR>> text-decoration:underline;}
<BR>> p.MsoPlainText, li.MsoPlainText, div.MsoPlainText
<BR>> {margin:0in;
<BR>> margin-bottom:.0001pt;
<BR>> font-size:10.0pt;
<BR>> font-family:"Courier New";}
<BR>> p.MsoAutoSig, li.MsoAutoSig, div.MsoAutoSig
<BR>> {margin:0in;
<BR>> margin-bottom:.0001pt;
<BR>> font-size:12.0pt;
<BR>> font-family:"Times New Roman";}
<BR>> span.EmailStyle17
<BR>> {mso-style-type:personal-compose;
<BR>> font-family:Arial;
<BR>> color:windowtext;}
<BR>> @page Section1
<BR>> {size:8.5in 11.0in;
<BR>> margin:1.0in 1.25in 1.0in 1.25in;}
<BR>> div.Section1
<BR>> {page:Section1;}
<BR>> -->
<BR>> </STYLE>
<BR>> <BR>> <BR>> <BR>> <BR>> <BR>>
<DIV class=3DSection1><BR>> <BR>>
<P class=3DMsoNormal><FONT face=3DArial size=3><SPAN ="<BR">> style=3D'font-size:10.0pt; <BR>> font-family:Arial'>Has anyone had to replace a tiller? I looked at = <BR>> West Marine’s <BR>> site but concluded that custom is the only option. Any idea on = <BR>> where I could <BR>> find someone who had done these for the Frers = <BR>> 33?<?xml:namespace prefix = o ns = "3D=20" /><o:p></o:p></SPAN></FONT></P><BR>> <BR>>
<P class=3DMsoNormal><FONT face=3DArial size=3><SPAN ="<BR">> style=3D'font-size:10.0pt; <BR>> font-family:Arial'><o:p> </o:p></SPAN></FONT></P><BR>> <BR>>
<P class=3DMsoPlainText><I><FONT color=#3d0a00 size=3 ="<BR">> face=3DArial><SPAN <BR>> style=3D'font-size:10.0pt;font-family:Arial;color:navy;font-style:italic'= <BR>> >Bill <BR>> Rusconi<o:p></o:p></SPAN></FONT></I></P><BR>> <BR>>
<P class=3DMsoPlainText><I><FONT color=#3d0a00 size=3 ="<BR">> face=3DArial><SPAN <BR>> style=3D'font-size:10.0pt;font-family:Arial;color:navy;font-style:italic'= <BR>> >Impetuous<o:p></o:p></SPAN></FONT></I></P><BR>> <BR>>
<P class=3DMsoPlainText><st1:country-region w:st='3D"on"'><?xml:namespace prefix = st1 /><st1:place ="<BR">> w:st=3D"on"><I><FONT <BR>> size=3D2 color=3Dnavy face=3DArial><SPAN ="<BR">> style=3D'font-size:10.0pt;font-family:Arial; <BR>> = <BR>> color:navy;font-style:italic'>USA</SPAN></FONT></I></st1:place>> try-region><I><FONT <BR>> color=3Dnavy face=3DArial><SPAN ="<BR">> style=3D'font-family:Arial;color:navy;font-style: <BR>> italic'> 51284<o:p></o:p></SPAN></FONT></I></P><BR>> <BR>>
<P class=3DMsoPlainText><I><FONT color=#3d0a00 size=3 ="<BR">> face=3DArial><SPAN <BR>> style=3D'font-size:10.0pt;font-family:Arial;color:navy;font-style:italic'= <BR>> ><o:p> </o:p></SPAN></FONT></I></P><BR>> <BR>>
<P class=3DMsoPlainText><I><FONT color=#3d0a00 size=3 ="<BR">> face=3DArial><SPAN <BR>> style=3D'font-size:10.0pt;font-family:Arial;color:navy;font-style:italic'= <BR>> >Park <BR>> City, UT<o:p></o:p></SPAN></FONT></I></P><BR>> <BR>>
<P class=3DMsoNormal><FONT face='3D"Times' size=3 Roman? New><SPAN ="<BR">> style=3D'font-size: <BR>> 12.0pt'><o:p> </o:p></SPAN></FONT></P><BR>> <BR>> </DIV><BR>> <BR>> <BR>> <BR>> <BR>> <BR>> ------_=_NextPart_001_01C798D8.D63F939A-- <BR>> <BR>> <BR>> --__--__-- <BR>> <BR>> Message: 2 <BR>> Date: Thu, 17 May 2007 22:24:36 -0400 <BR>> From: Arthur Kelley <AKELLEY@OPTONLINE.NET><BR>> Subject: Re: [frers-list]Tiller dimensions <BR>> To: frers-list@lists.frers33.com <BR>> Reply-To: frers-list@lists.frers33.com <BR>> <BR>> This is a multi-part message in MIME format. <BR>> <BR>> --Boundary_(ID_CZCjynwWQ/pl6UIRGZDezA) <BR>> Content-type: text/plain; charset=iso-8859-1 <BR>> Content-transfer-encoding: 7BIT <BR>> <BR>> Bill, <BR>> <BR>> I was directed to Karl's Boat Shop in MA. I ended up replacing the entire <BR>> assembly with a wheel (reverting back to a wheel actually), but I was told
that <BR>> Karl's was the source of the after-market tiller that came with my boat. <BR>> <BR>> http://www.karlsboatshop.com/tillerform.html <BR>> <BR>> Let us know how you make out. <BR>> <BR>> Art Kelley <BR>> "Brilliant" <BR>> ----- Original Message ----- <BR>> From: William Rusconi <BR>> To: frers-list@lists.frers33.com <BR>> Sent: Thursday, May 17, 2007 7:12 PM <BR>> Subject: [frers-list]Tiller dimensions <BR>> <BR>> <BR>> Has anyone had to replace a tiller? I looked at West Marine's site but <BR>> concluded that custom is the only option. Any idea on where I could find <BR>> someone who had done these for the Frers 33? <BR>> <BR>> <BR>> <BR>> Bill Rusconi <BR>> <BR>> Impetuous <BR>> <BR>> USA 51284 <BR>> <BR>> <BR>> <BR>> Park City, UT <BR>> <BR>> <BR>> <BR>> --Boundary_(ID_CZCjynwWQ/pl6UIRGZDezA) <BR>> Content-type: text/html; charset=iso-8859-1 <BR>> Content-transfer
-encoding: quoted-printable <BR>> <BR>> <BR>> > "urn:schemas-microsoft-com:office:office" xmlns:w =3D=20 <BR>> "urn:schemas-microsoft-com:office:word" xmlns:st1 =3D=20 <BR>> "urn:schemas-microsoft-com:office:smarttags"> <BR>>
<META http-equiv=3DContent-Type content='3D"text/html;' ="<BR">> charset=3Diso-8859-1"> <BR>>
<META content='3D"MSHTML' 6.00.6000.16441?="<BR">> name=3DGENERATOR><o:SmartTagType=20 <BR>> name=3D"country-region"=20 <BR>> namespaceuri=3D"urn:schemas-microsoft-com:office:smarttags">> ype><o:SmartTagType=20 <BR>> name=3D"place"=20 <BR>> namespaceuri=3D"urn:schemas-microsoft-com:office:smarttags">> ype> <BR>>
<STYLE>st1\:* {
<BR>> BEHAVIOR: url(#default#ieooui)
<BR>> }
<BR>> </STYLE>
<BR>> <BR>>
<STYLE>
<BR>> <!--
<BR>> /* Style Definitions */
<BR>> p.MsoNormal, li.MsoNormal, div.MsoNormal
<BR>> {margin:0in;
<BR>> margin-bottom:.0001pt;
<BR>> font-size:12.0pt;
<BR>> font-family:"Times New Roman";}
<BR>> a:link, span.MsoHyperlink
<BR>> {color:blue;
<BR>> text-decoration:underline;}
<BR>> a:visited, span.MsoHyperlinkFollowed
<BR>> {color:purple;
<BR>> text-decoration:underline;}
<BR>> p.MsoPlainText, li.MsoPlainText, div.MsoPlainText
<BR>> {margin:0in;
<BR>> margin-bottom:.0001pt;
<BR>> font-size:10.0pt;
<BR>> font-family:"Courier New";}
<BR>> p.MsoAutoSig, li.MsoAutoSig, div.MsoAutoSig
<BR>> {margin:0in;
<BR>> margin-bottom:.0001pt;
<BR>> font-size:12.0pt;
<BR>> font-family:"Times New Roman";}
<BR>> span.EmailStyle17
<BR>> {mso-style-type:personal-compose;
<BR>> font-family:Arial;
<BR>> color:windowtext;}
<BR>> @page Section1
<BR>> {size:8.5in 11.0in;
<BR>> margin:1.0in 1.25in 1.0in 1.25in;}
<BR>> div.Section1
<BR>> {page:Section1;}
<BR>> -->
<BR>> </STYLE>
<BR>> <BR>> <BR>>
<DIV><FONT face=3DArial size=3>Bill,</FONT></DIV><BR>>
<DIV><FONT face=3DArial size=3></FONT> </DIV><BR>>
<DIV><FONT face=3DArial size=3>I was directed to Karl's Boat Shop in = <BR>> MA. I=20 <BR>> ended up replacing the entire assembly with a wheel (reverting back to a = <BR>> wheel=20 <BR>> actually), but I was told that Karl's was the source of the after-market = <BR>> tiller=20 <BR>> that came with my boat.</FONT></DIV><BR>>
<DIV><FONT face=3DArial size=3></FONT> </DIV><BR>>
<DIV><FONT face=3DArial size=3><A=20 <BR>> href=3D"3Dwrusconi@myriad.com ="<BR">> href=3D"mailto:wrusconi@myriad.com">William=20 <BR>> Rusconi</A>
<DIV></DIV><BR>>
<DIV arial? 10pt><B>To:</B> <A ="<BR">> title=3Dfrers-list@lists.frers33.com=20 <BR>> = <BR>> href=3D"mailto:frers-list@lists.frers33.com">frers-list@lists.frers33.com= <BR>> </A>=20 <BR>> </DIV><BR>>
<DIV arial? 10pt><B>Sent:</B> Thursday, May 17, 2007 = <BR>> 7:12=20 <BR>> PM</DIV><BR>>
<DIV arial? 10pt><B>Subject:</B> [frers-list]Tiller=20 <BR>> dimensions</DIV><BR>>
<DIV><BR></DIV><BR>>
<DIV class=3DSection1><BR>>
<P class=3DMsoNormal><FONT face=3DArial size=3><SPAN=20 <BR>> style=3D"FONT-SIZE: 10pt; FONT-FAMILY: Arial">Has anyone had to = <BR>> replace a=20 <BR>> tiller? I looked at West Marine=92s site but concluded that = <BR>> custom is the=20 <BR>> only option. Any idea on where I could find someone who had done = <BR>> these=20 <BR>> for the Frers 33?<o:p></o:p></SPAN></FONT></P><BR>>
<P class=3DMsoNormal><FONT face=3DArial size=3><SPAN=20 <BR>> style=3D"FONT-SIZE: 10pt; FONT-FAMILY: = <BR>> Arial"><o:p> </o:p></SPAN></FONT></P><BR>>
<P class=3DMsoPlainText><I><FONT face=3DArial color=#3d0a00 ="<BR">> size=3D2><SPAN=20 <BR>> style=3D"FONT-SIZE: 10pt; COLOR: navy; FONT-STYLE: italic; = <BR>> FONT-FAMILY: Arial">Bill=20 <BR>> Rusconi<o:p></o:p></SPAN></FONT></I></P><BR>>
<P class=3DMsoPlainText><I><FONT face=3DArial color=#3d0a00 ="<BR">> size=3D2><SPAN=20 <BR>> style=3D"FONT-SIZE: 10pt; COLOR: navy; FONT-STYLE: italic; = <BR>> FONT-FAMILY: Arial">Impetuous<o:p></o:p></SPAN></FONT></I></P><BR>>
<P class=3DMsoPlainText><st1:country-region w:st='3D"on"'><st1:place=20 <BR>> w:st=3D"on"><I><FONT face=3DArial color=#3d0a00 size=3><SPAN=20 <BR>> style=3D"FONT-SIZE: 10pt; COLOR: navy; FONT-STYLE: italic; = <BR>> FONT-FAMILY: = <BR>> Arial">USA</SPAN></FONT></I></st1:place=20></st1:country-region><I><FONT=20 <BR>> face=3DArial color=3Dnavy><SPAN=20 <BR>> style=3D"COLOR: navy; FONT-STYLE: italic; FONT-FAMILY: Arial">=20 <BR>> 51284<o:p></o:p></SPAN></FONT></I></P><BR>>
<P class=3DMsoPlainText><I><FONT face=3DArial color=#3d0a00 ="<BR">> size=3D2><SPAN=20 <BR>> style=3D"FONT-SIZE: 10pt; COLOR: navy; FONT-STYLE: italic; = <BR>> FONT-FAMILY: Arial"><o:p> </o:p></SPAN></FONT></I></P><BR>>
<P class=3DMsoPlainText><I><FONT face=3DArial color=#3d0a00 ="<BR">> size=3D2><SPAN=20 <BR>> style=3D"FONT-SIZE: 10pt; COLOR: navy; FONT-STYLE: italic; = <BR>> FONT-FAMILY: Arial">Park=20 <BR>> City, UT<o:p></o:p></SPAN></FONT></I></P><BR>>
<P class=3DMsoNormal><FONT face='3D"Times' size=3 Roman? New><SPAN=20 <BR>> style=3D"FONT-SIZE: = <BR>> 12pt"><o:p> </o:p></SPAN></FONT></P></DIV></BLOCKQUOTE></HTML= <BR>> > <BR>> <BR>> --Boundary_(ID_CZCjynwWQ/pl6UIRGZDezA)-- <BR>> <BR>> <BR>> --__--__-- <BR>> <BR>> _______________________________________________ <BR>> frers-list mailing list <BR>> frers-list@lists.frers33.com <BR>> http://lists.frers33.com/mailman/listinfo/frers-list <BR>> <BR>> <BR>> End of frers-list Digest </BLOCKQUOTE></o:SmartTagType=20></o:SmartTagType=20></st1:country-region></o:SmartTagType></o:SmartTagType></body></html>
--NextPart_Webmail_9m3u9jl4l_12647_1179466111_0--