I
have the following equipment from a Frers 33 that is surplus to my requirements
and may be of interest to fellow Frers 33 owners:
1. One North Pentex mainsail
in very good condition. Heavily built and a great cruising sail or club
racing sail. Almost in like new condition. $1200 obo.
2. One Barrient 21 Self
Tailing aluminum cabin top winch in excellent condition and one Barrient 21
Self Tailing aluminum cabin top winch with all parts in very good condition
minus the drum (excellent source of spares) $450 for the pair.
3. One Martec elliptical folding
prop new $375 (16” x 10” for a 1” shaft)
4. One complete Raymarine 3000
Wheel drive autopilot system $500
5. One pair spectra spinnaker
halyards 10 mm $125 each c/w shackles (one red and one green)
Contact
Rod Stright at StrightR@eastlink.ca
for additional information.
--Boundary_(ID_huqMaUtkWfYC8iDQy3lLEg)--
From frers-list@lists.frers33.com Tue Jan 12 12:22:04 2010
From: frers-list@lists.frers33.com (rod stright)
Date: Tue, 12 Jan 2010 08:22:04 -0400
Subject: [frers-list]Automatic Bilge Pump Installation
Message-ID: <000001ca9381$d9d6d5c0$8d848140$@ca>
This is a multi-part message in MIME format.
--Boundary_(ID_k0xeTVriuH7IWWOHAwdjNw)
Content-type: text/plain; CHARSET=US-ASCII
Content-transfer-encoding: 7BIT
Planning on installing an automatic electric bilge pump in place of the
current one installed under the port settee which discharges aft near the
wheel at the gunwale on the port side. Wondering if anyone has done this
and has any recommendations on the type of pump and plumbing/discharge
arrangements .
Thanks
Rod
S/V Equinox
--Boundary_(ID_k0xeTVriuH7IWWOHAwdjNw)
Content-type: text/html; CHARSET=US-ASCII
Content-transfer-encoding: 7BIT
Planning
on installing an automatic electric bilge pump in place of the current one
installed under the port settee which discharges aft near the wheel at the gunwale
on the port side. Wondering if anyone has done this and has any
recommendations on the type of pump and plumbing/discharge arrangements .
Thanks
Rod
S/V
Equinox
--Boundary_(ID_k0xeTVriuH7IWWOHAwdjNw)--
From frers-list@lists.frers33.com Fri Jan 29 01:38:48 2010
From: frers-list@lists.frers33.com (Rod Stright)
Date: Thu, 28 Jan 2010 21:38:48 -0400
Subject: [frers-list]Frers 33 Drawings/plans
Message-ID: <000b01caa083$cde705f0$69b511d0$@ca>
This is a multi-part message in MIME format.
--Boundary_(ID_Tb/pfwGIGe6fgTIwM0eLWA)
Content-type: text/plain; CHARSET=US-ASCII
Content-transfer-encoding: 7BIT
Does anyone happen to have some good drawings of the Frers 33. I am having
a model built and need some good line drawings and plans. The ones on the
website aren't that great a quality.
Rod
Equinox
--Boundary_(ID_Tb/pfwGIGe6fgTIwM0eLWA)
Content-type: text/html; CHARSET=US-ASCII
Content-transfer-encoding: 7BIT