[frers-list]Engine Exhaust & Rudder Bearings.

[Robert Connell]

--1298779297-268423765-1333148187=:37906
Content-Type: text/plain; charset=iso-8859-1
Content-Transfer-Encoding: quoted-printable

Jack, I can get you the lenghts tomorrow. Do you need the section from the =
engine to the muffler or from the muffler to the transom. Jeffa makes repla=
cement bearings for the original in Harken,they are not cheap. We replaced =
the bearings in Salsa last year, she was a tiller boat so it was less. I ca=
n get you part numbers. Jack are you replacing the exhaust elbow? If it is =
original I would recomend=A0it as it is probably plugged up. If you would l=
ike call my cell 860-227-1934=A0

--- On Fri, 3/30/12, Comodore2@aol.com <Comodore2@aol.com> wrote:


From: Comodore2@aol.com <Comodore2@aol.com>
Subject: [frers-list]Engine Exhaust & Rudder Bearings.
To: frers-list@lists.frers33.com
Date: Friday, March 30, 2012, 1:45 PM




Does anyone know the length and diameter of the Exhaust Hose?
=A0
Has anyone had their rudder bearings changed by a yard? If so, which yard? =
and what was the cost to have a yard do the work?=20
=A0
JacK Greifzu
=A0
=A0
--1298779297-268423765-1333148187=:37906
Content-Type: text/html; charset=iso-8859-1
Content-Transfer-Encoding: quoted-printable

<table cellspacing=3D"0" cellpadding=3D"0" border=3D"0" ><tr><td valign=3D"=
top" style=3D"font: inherit;">Jack, I can get you the lenghts tomorrow. Do =
you need the section from the engine to the muffler or from the muffler to =
the transom. Jeffa makes replacement bearings for the original in Harken,th=
ey are not cheap. We replaced the bearings in Salsa last year, she was a ti=
ller boat so it was less. I can get you part numbers. Jack are you replacin=
g the exhaust elbow? If it is original I would recomend&nbsp;it as it is pr=
obably plugged up. If you would like call my cell 860-227-1934&nbsp;<BR><BR=
>--- On <B>Fri, 3/30/12, Comodore2@aol.com <I>&lt;Comodore2@aol.com&gt;</I>=
</B> wrote:<BR>
<BLOCKQUOTE style=3D"BORDER-LEFT: rgb(16,16,255) 2px solid; PADDING-LEFT: 5=
px; MARGIN-LEFT: 5px"><BR>From: Comodore2@aol.com &lt;Comodore2@aol.com&gt;=
<BR>Subject: [frers-list]Engine Exhaust &amp; Rudder Bearings.<BR>To: frers=
-list@lists.frers33.com<BR>Date: Friday, March 30, 2012, 1:45 PM<BR><BR>
<DIV id=3Dyiv1211601087>
<DIV><FONT id=3Dyiv1211601087role_document color=3D#000000 size=3D2 face=3D=
Arial>
<DIV>Does anyone know the length and diameter of the Exhaust Hose?</DIV>
<DIV>&nbsp;</DIV>
<DIV>Has anyone had their rudder bearings changed by a yard? If so, which y=
ard? and what was the cost to have a yard do the work? </DIV>
<DIV>&nbsp;</DIV>
<DIV>JacK Greifzu</DIV>
<DIV>&nbsp;</DIV>
<DIV>&nbsp;</DIV></FONT></DIV></DIV></BLOCKQUOTE></td></tr></table>
--1298779297-268423765-1333148187=:37906--