[frers-list]Engine Exhaust & Rudder Bearings.
Robert Connell
frers-list@lists.frers33.com
Sat, 31 Mar 2012 14:51:20 -0700 (PDT)
--122454116-1361723635-1333230680=:46039
Content-Type: text/plain; charset=iso-8859-1
Content-Transfer-Encoding: quoted-printable
Jack, I did not measearure the section aft of the muffler, can do so tomorr=
ow, the fwd section is 3' and 2" diameter. I will be back at the boat tomor=
row and get the aft length that may vary depending on how=A0 much a loop th=
ere is.
--- On Fri, 3/30/12, Comodore2@aol.com <Comodore2@aol.com> wrote:
From: Comodore2@aol.com <Comodore2@aol.com>
Subject: Re: [frers-list]Engine Exhaust & Rudder Bearings.
To: frers-list@lists.frers33.com
Date: Friday, March 30, 2012, 9:30 PM
section from muffler to transom. Not replacing Elbow at this time, I'm corr=
ecting major problems on survey.
Jack
=A0
In a message dated 3/30/2012 6:57:02 P.M. Eastern Daylight Time, conn2523@y=
ahoo.com writes:
Jack, I can get you the lenghts tomorrow. Do you need the section from the =
engine to the muffler or from the muffler to the transom. Jeffa makes repla=
cement bearings for the original in Harken,they are not cheap. We replaced =
the bearings in Salsa last year, she was a tiller boat so it was less. I ca=
n get you part numbers. Jack are you replacing the exhaust elbow? If it is =
original I would recomend=A0it as it is probably plugged up. If you would l=
ike call my cell 860-227-1934=A0
--- On Fri, 3/30/12, Comodore2@aol.com <Comodore2@aol.com> wrote:
From: Comodore2@aol.com <Comodore2@aol.com>
Subject: [frers-list]Engine Exhaust & Rudder Bearings.
To: frers-list@lists.frers33.com
Date: Friday, March 30, 2012, 1:45 PM
Does anyone know the length and diameter of the Exhaust Hose?
=A0
Has anyone had their rudder bearings changed by a yard? If so, which yard? =
and what was the cost to have a yard do the work?=20
=A0
JacK Greifzu
=A0
=A0
--122454116-1361723635-1333230680=:46039
Content-Type: text/html; charset=iso-8859-1
Content-Transfer-Encoding: quoted-printable
<table cellspacing=3D"0" cellpadding=3D"0" border=3D"0" ><tr><td valign=3D"=
top" style=3D"font: inherit;">Jack, I did not measearure the section aft of=
the muffler, can do so tomorrow, the fwd section is 3' and 2" diameter. I =
will be back at the boat tomorrow and get the aft length that may vary depe=
nding on how much a loop there is.<BR><BR>--- On <B>Fri, 3/30/12, Com=
odore2@aol.com <I><Comodore2@aol.com></I></B> wrote:<BR>
<BLOCKQUOTE style=3D"BORDER-LEFT: rgb(16,16,255) 2px solid; PADDING-LEFT: 5=
px; MARGIN-LEFT: 5px"><BR>From: Comodore2@aol.com <Comodore2@aol.com>=
<BR>Subject: Re: [frers-list]Engine Exhaust & Rudder Bearings.<BR>To: f=
rers-list@lists.frers33.com<BR>Date: Friday, March 30, 2012, 9:30 PM<BR><BR=
>
<DIV id=3Dyiv1621238926>
<DIV><FONT id=3Dyiv1621238926role_document color=3D#000000 size=3D2 face=3D=
Arial>
<DIV>section from muffler to transom. Not replacing Elbow at this time, I'm=
correcting major problems on survey.</DIV>
<DIV>Jack</DIV>
<DIV> </DIV>
<DIV>
<DIV>In a message dated 3/30/2012 6:57:02 P.M. Eastern Daylight Time, conn2=
523@yahoo.com writes:</DIV>
<BLOCKQUOTE style=3D"BORDER-LEFT: blue 2px solid; PADDING-LEFT: 5px; MARGIN=
-LEFT: 5px"><FONT style=3D"BACKGROUND-COLOR: transparent" color=3D#000000 s=
ize=3D2 face=3DArial>
<TABLE border=3D0 cellSpacing=3D0 cellPadding=3D0>
<TBODY>
<TR>
<TD vAlign=3Dtop>Jack, I can get you the lenghts tomorrow. Do you need the =
section from the engine to the muffler or from the muffler to the transom. =
Jeffa makes replacement bearings for the original in Harken,they are not ch=
eap. We replaced the bearings in Salsa last year, she was a tiller boat so =
it was less. I can get you part numbers. Jack are you replacing the exhaust=
elbow? If it is original I would recomend it as it is probably plugge=
d up. If you would like call my cell 860-227-1934 <BR><BR>--- On <B>Fr=
i, 3/30/12, Comodore2@aol.com <I><Comodore2@aol.com></I></B> wrote:<B=
R>
<BLOCKQUOTE style=3D"BORDER-LEFT: rgb(16,16,255) 2px solid; PADDING-LEFT: 5=
px; MARGIN-LEFT: 5px"><BR>From: Comodore2@aol.com <Comodore2@aol.com>=
<BR>Subject: [frers-list]Engine Exhaust & Rudder Bearings.<BR>To: frers=
-list@lists.frers33.com<BR>Date: Friday, March 30, 2012, 1:45 PM<BR><BR>
<DIV id=3Dyiv1621238926>
<DIV><FONT id=3Dyiv1621238926role_document color=3D#000000 size=3D2 face=3D=
Arial>
<DIV>Does anyone know the length and diameter of the Exhaust Hose?</DIV>
<DIV> </DIV>
<DIV>Has anyone had their rudder bearings changed by a yard? If so, which y=
ard? and what was the cost to have a yard do the work? </DIV>
<DIV> </DIV>
<DIV>JacK Greifzu</DIV>
<DIV> </DIV>
<DIV> </DIV></FONT></DIV></DIV></BLOCKQUOTE></TD></TR></TBODY></TABLE>=
</FONT></BLOCKQUOTE></DIV></FONT></DIV></DIV></BLOCKQUOTE></td></tr></table=
>
--122454116-1361723635-1333230680=:46039--