EXT: [frers-list]Fuel tank Sender unit

[frers-list@lists.frers33.com]

Did it last year on my Frers 36. Don't know if it's the same set-up, but it=
 was very straight forward once I removed the ply sheeting settee base - se=
nder sat right on top of tank held in by 5 x P2 screws. Sending wire and ea=
rthing wire we also sitting right on top of unit. Mark the sending units po=
sition as it lines up with the tank before you remove it, it'll help when p=
ositioning the new unit.

On Jun 18, 2016, at 6:34 PM, "frers-list-admin@lists.frers33.com<mailto:fre=
rs-list-admin@lists.frers33.com>" <frers-list-admin@lists.frers33.com<mailt=
o:frers-list-admin@lists.frers33.com>> wrote:

Has anyone taken the fuel gauge sender unit out of the fuel tank and is the=
re sufficient clearance to do so without moving the tank.  My fuel gauge is=
n=92t working and I an thinking the sender unit is likely toast.

Regards
Rod Stright