[MaxLite] Entrance Code/Time Clock

[Zenny Haczyk]

To all the access code requires that you add the asterisk '*'  to activate
the lock so, to gain access you must enter '1993*' 

 

Z

 

From: maxlite-bounces at lists.maxlite.com
[mailto:maxlite-bounces at lists.maxlite.com] On Behalf Of Zenny Haczyk
Sent: Thursday, September 16, 2010 6:52 PM
To: maxlite at lists.maxlite.com
Subject: [MaxLite] Entrance Code/Time Clock
Importance: High

 

To all associates:

Effective Monday the side entrance doors to the building will no longer be
accessible from the outside after 8:30 AM for security and to control access
to the building. 

 

On Friday we will be completing the installation of an access keypad and
intercom  system to be used to gain entrance to the building.  All
associates will then be required to enter and leave through the front door.
The access code is '1993' to enter and a sensor is used exit (a manual
release button is also installed in the event of a power failure.)

Please keep this code within MaxLite only.

 

With the implementation of the keypad system, guess and vendors will no
longer be able to enter the building unless escorted in by an associate or
announcing themselves  over the intercom at the front door. The operators
station will have the ability to communicate and release the door when
needed.

 

Inside sales and CSRS -  please be sure to direct all will calls and truck
pick-ups to the rear entrance and loading dock. 

 

Reserved parking-  as you have noticed we have designated specific parking
stalls  as reserved or visitors parking,  please be mindful of the signs and
do not park in them.

 

Time Clock - The keypad will be  located just as you enter the building
under the alarm console, final installation is being done and further
information will be sent once that is completed.

 

Zenny

 

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.maxlite.com/mailman/private/maxlite/attachments/20100917/b848c861/attachment.htm