[frers-list]RE: frers-list digest, Vol 1 #279 - 7 msgs
William Rusconi
frers-list@lists.frers33.com
Fri, 16 Jan 2009 17:17:13 -0700
Looking into the head, my door is hinged on the right with a locking
latch on the left, it opens out (of course) and the latch frequently
snags sail/spin bags as they are moved in and out of the v-berth. There
is actually some nice trim around the frame which, like the door as
probably marine plywood. I will check to see if I have any pictures.=20
Bill Rusconi
Impetuous, USA 51284
Bear Lake, Utah
-----Original Message-----
From: frers-list-admin@lists.frers33.com
[mailto:frers-list-admin@lists.frers33.com] On Behalf Of
frers-list-request@lists.frers33.com
Sent: Friday, January 16, 2009 5:10 PM
To: frers-list@lists.frers33.com
Subject: frers-list digest, Vol 1 #279 - 7 msgs
Send frers-list mailing list submissions to
frers-list@lists.frers33.com
To subscribe or unsubscribe via the World Wide Web, visit
http://lists.frers33.com/mailman/listinfo/frers-list
or, via email, send a message with subject or body 'help' to
frers-list-request@lists.frers33.com
You can reach the person managing the list at
frers-list-admin@lists.frers33.com
When replying, please edit your Subject line so it is more specific
than "Re: Contents of frers-list digest..."
Today's Topics:
1. Head Sliding Door (rod stright)
2. Re: Head Sliding Door (Neal Melanson)
3. Re: Head Sliding Door (akelley@optonline.net)
4. Re: Head Sliding Door (Dan Boyd)
5. Re: Head Sliding Door (Rich Peirce)
6. Frers 33 Head Door Ratings Etc. (rod stright)
7. Re: Frers 33 Head Door Ratings Etc. (FRANCIS ALBERT)
--__--__--
Message: 1
Date: Tue, 13 Jan 2009 19:32:39 -0400
From: rod stright <strightr@eastlink.ca>
To: frers-list@lists.frers33.com
Subject: [frers-list]Head Sliding Door
Reply-To: frers-list@lists.frers33.com
This is a multi-part message in MIME format.
--Boundary_(ID_8ZdQEfXYt5wIzIUfe4aIUg)
Content-type: text/plain; charset=3Diso-8859-1
Content-transfer-encoding: 7BIT
Hi Guys,
Need to replace the head door. Unfortunately there is not one there to
go by. Judging from the track it is a sliding door. Does anyone happen
to have a photo of one or can you provide a good description. I assume
it is simply a 1/2" piece of teak plywood with a mortised in latch but
I'm not sure having never seen one. I doubt there is any frame around
it but can't be sure as it could be a thin panel door.
Rod Stright
902-444-0016
902-209-0829(C)
--Boundary_(ID_8ZdQEfXYt5wIzIUfe4aIUg)
Content-type: text/html; charset=3Diso-8859-1
Content-transfer-encoding: 7BIT
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META http-equiv=3DContent-Type content=3D"text/html; =
charset=3Diso-8859-1">
<META content=3D"MSHTML 6.00.6000.16788" name=3DGENERATOR>
<STYLE></STYLE>
</HEAD>
<BODY bgColor=3D#ffffff>
<DIV><FONT color=3D#000080 size=3D2>Hi Guys,</FONT></DIV>
<DIV><FONT color=3D#000080 size=3D2></FONT> </DIV>
<DIV><FONT color=3D#000080 size=3D2>Need to replace the head door. =
Unfortunately there is not one there to go by. Judging from the
track it=20
is a sliding door. Does anyone happen to have a photo of one or
can you=20
provide a good description. I assume it is simply a 1/2" piece of
teak=20
plywood with a mortised in latch but I'm not sure having never seen
one. I=20
doubt there is any frame around it but can't be sure as it could be a
thin panel=20
door.</FONT></DIV>
<DIV><FONT color=3D#000080 size=3D2></FONT> </DIV>
<DIV><FONT color=3D#000080 size=3D2>Rod=20
Stright<BR>902-444-0016<BR>902-209-0829(C)</FONT></DIV></BODY></HTML>
--Boundary_(ID_8ZdQEfXYt5wIzIUfe4aIUg)--
--__--__--
Message: 2
Date: Tue, 13 Jan 2009 18:43:07 -0500
From: "Neal Melanson" <neal.melanson@gmail.com>
To: frers-list@lists.frers33.com
Subject: Re: [frers-list]Head Sliding Door
Reply-To: frers-list@lists.frers33.com
------=3D_Part_383306_17812843.1231890187726
Content-Type: text/plain; charset=3DISO-8859-1
Content-Transfer-Encoding: 7bit
Content-Disposition: inline
Hello Rod, Did you get yourself a new boat?
Neal
On Tue, Jan 13, 2009 at 6:32 PM, rod stright <strightr@eastlink.ca>
wrote:
> Hi Guys,
>
> Need to replace the head door. Unfortunately there is not one there
to go
> by. Judging from the track it is a sliding door. Does anyone happen
to
> have a photo of one or can you provide a good description. I assume
it is
> simply a 1/2" piece of teak plywood with a mortised in latch but I'm
not
> sure having never seen one. I doubt there is any frame around it but
can't
> be sure as it could be a thin panel door.
>
> Rod Stright
> 902-444-0016
> 902-209-0829(C)
>
------=3D_Part_383306_17812843.1231890187726
Content-Type: text/html; charset=3DISO-8859-1
Content-Transfer-Encoding: 7bit
Content-Disposition: inline
<div>Hello Rod, Did you get yourself a new boat?</div>
<div> </div>
<div>Neal</div>
<div> </div>
<div><br><br> </div>
<div class=3D"gmail_quote">On Tue, Jan 13, 2009 at 6:32 PM, rod stright
<span dir=3D"ltr"><<a
href=3D"mailto:strightr@eastlink.ca">strightr@eastlink.ca</a>></span>
wrote:<br>
<blockquote class=3D"gmail_quote" style=3D"PADDING-LEFT: 1ex; MARGIN: =
0px
0px 0px 0.8ex; BORDER-LEFT: #ccc 1px solid">
<div bgcolor=3D"#ffffff">
<div><font color=3D"#000080" size=3D"2">Hi Guys,</font></div>
<div><font color=3D"#000080" size=3D"2"></font> </div>
<div><font color=3D"#000080" size=3D"2">Need to replace the head =
door.
Unfortunately there is not one there to go by. Judging from the
track it is a sliding door. Does anyone happen to have a photo of
one or can you provide a good description. I assume it is simply a
1/2" piece of teak plywood with a mortised in latch but I'm not
sure having never seen one. I doubt there is any frame around it
but can't be sure as it could be a thin panel door.</font></div>
<div><font color=3D"#000080" size=3D"2"></font> </div><font
color=3D"#888888">
<div><font color=3D"#000080" size=3D"2">Rod
Stright<br>902-444-0016<br>902-209-0829(C)</font></div></font></div></bl
ockquote></div><br>
------=3D_Part_383306_17812843.1231890187726--
--__--__--
Message: 3
Date: Thu, 15 Jan 2009 04:20:21 +0000 (GMT)
From: akelley@optonline.net
Subject: Re: [frers-list]Head Sliding Door
To: frers-list@lists.frers33.com
Reply-To: frers-list@lists.frers33.com
This is a multi-part message in MIME format.
--Boundary_(ID_kzP+u21Wz7EYKSNWJj63lg)
Content-type: text/plain; charset=3Dus-ascii
Content-transfer-encoding: 7BIT
Content-disposition: inline
Rod,
=20
I am almost positive it is a thin paneled door - think of the weight
savings! Afraid I don't have any pics, but will probably open the boat
up in March. If you don't have better info by then, remind me at the
end of March and I'll try to get as much info to you as possible.
=20
Hmm, does it have a latch? Frankly I don't remember there being one.
Door's closed - stay out!
=20
Art
----- Original Message -----
From: rod stright=20
Date: Tuesday, January 13, 2009 6:35 pm
Subject: [frers-list]Head Sliding Door
To: frers-list@lists.frers33.com
> Hi Guys,
>=20
> Need to replace the head door. Unfortunately there is not one=20
> there to go by. Judging from the track it is a sliding door.=20
> Does anyone happen to have a photo of one or can you provide a=20
> good description. I assume it is simply a 1/2" piece of teak=20
> plywood with a mortised in latch but I'm not sure having never=20
> seen one. I doubt there is any frame around it but can't be=20
> sure as it could be a thin panel door.
>=20
> Rod Stright
> 902-444-0016
> 902-209-0829(C)
>=20
--Boundary_(ID_kzP+u21Wz7EYKSNWJj63lg)
Content-type: text/html; charset=3Dus-ascii
Content-transfer-encoding: 7BIT
Content-disposition: inline
<DIV>Rod,</DIV>
<DIV> </DIV>
<DIV>I am almost positive it is a thin paneled door - think of the
weight savings! Afraid I don't have any pics, but will probably
open the boat up in March. If you don't have better info by then,
remind me at the end of March and I'll try to get as much info to you as
possible.</DIV>
<DIV> </DIV>
<DIV>Hmm, does it have a latch? Frankly I don't remember there
being one. Door's closed - stay out!</DIV>
<DIV> </DIV>
<DIV>Art<BR><BR>----- Original Message -----<BR>From: rod
stright <STRIGHTR@EASTLINK.CA><BR>Date: Tuesday, January 13, 2009
6:35 pm<BR>Subject: [frers-list]Head Sliding Door<BR>To:
frers-list@lists.frers33.com<BR><BR>> Hi Guys,<BR>> <BR>> Need
to replace the head door. Unfortunately there is not one <BR>> there
to go by. Judging from the track it is a sliding door. <BR>> Does
anyone happen to have a photo of one or can you provide a <BR>> good
description. I assume it is simply a 1/2" piece of teak <BR>> plywood
with a mortised in latch but I'm not sure having never <BR>>
seen one. I doubt there is any frame around it but can't be <BR>>
sure as it could be a thin panel door.<BR>> <BR>> Rod
Stright<BR>> 902-444-0016<BR>> 902-209-0829(C)<BR>> </DIV>
--Boundary_(ID_kzP+u21Wz7EYKSNWJj63lg)--
--__--__--
Message: 4
To: frers-list@lists.frers33.com
Cc: frers-list@lists.frers33.com, frers-list-admin@lists.frers33.com
Subject: Re: [frers-list]Head Sliding Door
From: Dan Boyd <dan.boyd@biogenidec.com>
Date: Thu, 15 Jan 2009 09:03:35 -0500
Reply-To: frers-list@lists.frers33.com
This is a multipart message in MIME format.
--=3D_alternative 004D3B9F8525753F_=3D
Content-Type: text/plain; charset=3D"US-ASCII"
All,
It does have a Perko latch (knob on outside, lever on inside (who cares=20
about a lock).
Rod, time to come out of the closet - which boat did you purchase?
Cheers,
DJB
Dan Boyd
Biogen Idec Inc
Tel: 1.617.679.2274
Fax: 1.617.679.3599
akelley@optonline.net=20
Sent by: frers-list-admin@lists.frers33.com
14-Jan-2009 11:20 PM
Please respond to
frers-list@lists.frers33.com
Message Size: 6.5 KB
To
frers-list@lists.frers33.com
cc
Subject
Re: [frers-list]Head Sliding Door
Rod,
=20
I am almost positive it is a thin paneled door - think of the weight=20
savings! Afraid I don't have any pics, but will probably open the boat
up=20
in March. If you don't have better info by then, remind me at the end
of=20
March and I'll try to get as much info to you as possible.
=20
Hmm, does it have a latch? Frankly I don't remember there being one.=20
Door's closed - stay out!
=20
Art
----- Original Message -----
From: rod stright=20
Date: Tuesday, January 13, 2009 6:35 pm
Subject: [frers-list]Head Sliding Door
To: frers-list@lists.frers33.com
> Hi Guys,
>=20
> Need to replace the head door. Unfortunately there is not one=20
> there to go by. Judging from the track it is a sliding door.=20
> Does anyone happen to have a photo of one or can you provide a=20
> good description. I assume it is simply a 1/2" piece of teak=20
> plywood with a mortised in latch but I'm not sure having never=20
> seen one. I doubt there is any frame around it but can't be=20
> sure as it could be a thin panel door.
>=20
> Rod Stright
> 902-444-0016
> 902-209-0829(C)
>=20
--=3D_alternative 004D3B9F8525753F_=3D
Content-Type: text/html; charset=3D"US-ASCII"
<br><font size=3D2 face=3D"sans-serif">All,</font>
<br>
<br><font size=3D2 face=3D"sans-serif">It does have a Perko latch (knob =
on
outside, lever on inside (who cares about a lock).</font>
<br>
<br><font size=3D2 face=3D"sans-serif">Rod, time to come out of the =
closet
- which boat did you purchase?</font>
<br>
<br><font size=3D2 face=3D"sans-serif">Cheers,</font>
<br><font size=3D2 face=3D"sans-serif">DJB<br>
</font>
<br>
<br><font size=3D2 face=3D"sans-serif">Dan Boyd<br>
Biogen Idec Inc<br>
Tel: 1.617.679.2274<br>
Fax: 1.617.679.3599<br>
</font>
<br>
<br>
<br>
<table width=3D100%>
<tr valign=3Dtop>
<td width=3D40%><font size=3D1
face=3D"sans-serif"><b>akelley@optonline.net</b>
</font>
<br><font size=3D1 face=3D"sans-serif">Sent by:
frers-list-admin@lists.frers33.com</font>
<p><font size=3D1 face=3D"sans-serif">14-Jan-2009 11:20 PM</font>
<table border>
<tr valign=3Dtop>
<td bgcolor=3Dwhite>
<div align=3Dcenter><font size=3D1 face=3D"sans-serif">Please respond =
to<br>
frers-list@lists.frers33.com</font></div></table>
<p><font size=3D1 face=3D"sans-serif">Message Size: <b>6.5 KB</b></font>
<td width=3D59%>
<table width=3D100%>
<tr valign=3Dtop>
<td>
<div align=3Dright><font size=3D1 face=3D"sans-serif">To</font></div>
<td><font size=3D1 =
face=3D"sans-serif">frers-list@lists.frers33.com</font>
<tr valign=3Dtop>
<td>
<div align=3Dright><font size=3D1 face=3D"sans-serif">cc</font></div>
<td>
<tr valign=3Dtop>
<td>
<div align=3Dright><font size=3D1 =
face=3D"sans-serif">Subject</font></div>
<td><font size=3D1 face=3D"sans-serif">Re: [frers-list]Head Sliding
Door</font></table>
<br>
<table>
<tr valign=3Dtop>
<td>
<td></table>
<br></table>
<br>
<br>
<br><font size=3D3>Rod,</font>
<br><font size=3D3> </font>
<br><font size=3D3>I am almost positive it is a thin paneled door - =
think
of the weight savings! Afraid I don't have any pics, but will
probably
open the boat up in March. If you don't have better info by then,
remind me at the end of March and I'll try to get as much info to you as
possible.</font>
<br><font size=3D3> </font>
<br><font size=3D3>Hmm, does it have a latch? Frankly I don't
remember
there being one. Door's closed - stay out!</font>
<br><font size=3D3> </font>
<br><font size=3D3>Art<br>
<br>
----- Original Message -----<br>
From: rod stright <br>
Date: Tuesday, January 13, 2009 6:35 pm<br>
Subject: [frers-list]Head Sliding Door<br>
To: frers-list@lists.frers33.com<br>
<br>
> Hi Guys,<br>
> <br>
> Need to replace the head door. Unfortunately there is not one <br>
> there to go by. Judging from the track it is a sliding door. <br>
> Does anyone happen to have a photo of one or can you provide a <br>
> good description. I assume it is simply a 1/2" piece of teak
<br>
> plywood with a mortised in latch but I'm not sure having never <br>
> seen one. I doubt there is any frame around it but can't be <br>
> sure as it could be a thin panel door.<br>
> <br>
> Rod Stright<br>
> 902-444-0016<br>
> 902-209-0829(C)<br>
> </font>
<br>
--=3D_alternative 004D3B9F8525753F_=3D--
--__--__--
Message: 5
Date: Thu, 15 Jan 2009 09:10:58 -0500
From: "Rich Peirce" <rich.peirce@gmail.com>
To: frers-list@lists.frers33.com
Subject: Re: [frers-list]Head Sliding Door
Cc: frers-list-admin@lists.frers33.com
Reply-To: frers-list@lists.frers33.com
------=3D_Part_17872_13112436.1232028658494
Content-Type: text/plain; charset=3DISO-8859-1
Content-Transfer-Encoding: 7bit
Content-Disposition: inline
I have the same setup
On Thu, Jan 15, 2009 at 9:03 AM, Dan Boyd <dan.boyd@biogenidec.com>
wrote:
>
> All,
>
> It does have a Perko latch (knob on outside, lever on inside (who
cares
> about a lock).
>
> Rod, time to come out of the closet - which boat did you purchase?
>
> Cheers,
> DJB
>
>
> Dan Boyd
> Biogen Idec Inc
> Tel: 1.617.679.2274
> Fax: 1.617.679.3599
>
>
>
> *akelley@optonline.net*
> Sent by: frers-list-admin@lists.frers33.com
>
> 14-Jan-2009 11:20 PM Please respond to
> frers-list@lists.frers33.com
>
> Message Size: *6.5 KB*
> To
> frers-list@lists.frers33.com cc
> Subject
> Re: [frers-list]Head Sliding Door
>
>
>
>
> Rod,
>
> I am almost positive it is a thin paneled door - think of the weight
> savings! Afraid I don't have any pics, but will probably open the
boat up
> in March. If you don't have better info by then, remind me at the end
of
> March and I'll try to get as much info to you as possible.
>
> Hmm, does it have a latch? Frankly I don't remember there being one.
> Door's closed - stay out!
>
> Art
>
> ----- Original Message -----
> From: rod stright
> Date: Tuesday, January 13, 2009 6:35 pm
> Subject: [frers-list]Head Sliding Door
> To: frers-list@lists.frers33.com
>
> > Hi Guys,
> >
> > Need to replace the head door. Unfortunately there is not one
> > there to go by. Judging from the track it is a sliding door.
> > Does anyone happen to have a photo of one or can you provide a
> > good description. I assume it is simply a 1/2" piece of teak
> > plywood with a mortised in latch but I'm not sure having never
> > seen one. I doubt there is any frame around it but can't be
> > sure as it could be a thin panel door.
> >
> > Rod Stright
> > 902-444-0016
> > 902-209-0829(C)
> >
>
------=3D_Part_17872_13112436.1232028658494
Content-Type: text/html; charset=3DISO-8859-1
Content-Transfer-Encoding: 7bit
Content-Disposition: inline
I have the same setup<br><br>
<div class=3D"gmail_quote">On Thu, Jan 15, 2009 at 9:03 AM, Dan Boyd =
<span
dir=3D"ltr"><<a
href=3D"mailto:dan.boyd@biogenidec.com">dan.boyd@biogenidec.com</a>></=
s
pan> wrote:<br>
<blockquote class=3D"gmail_quote" style=3D"PADDING-LEFT: 1ex; MARGIN: =
0px
0px 0px 0.8ex; BORDER-LEFT: #ccc 1px solid"><br><font =
face=3D"sans-serif"
size=3D"2">All,</font> <br><br><font face=3D"sans-serif" size=3D"2">It =
does
have a Perko latch (knob on outside, lever on inside (who cares about a
lock).</font> <br>
<br><font face=3D"sans-serif" size=3D"2">Rod, time to come out of the =
closet
- which boat did you purchase?</font> <br><br><font face=3D"sans-serif"
size=3D"2">Cheers,</font> <br><font face=3D"sans-serif"
size=3D"2">DJB<br></font><br>
<br><font face=3D"sans-serif" size=3D"2">Dan Boyd<br>Biogen Idec =
Inc<br>Tel:
1.617.679.2274<br>Fax: 1.617.679.3599<br></font><br><br><br>
<table width=3D"100%">
<tbody>
<tr valign=3D"top">
<td width=3D"40%"><font face=3D"sans-serif" size=3D"1"><b><a
href=3D"mailto:akelley@optonline.net"
target=3D"_blank">akelley@optonline.net</a></b> </font><br><font
face=3D"sans-serif" size=3D"1">Sent by: <a
href=3D"mailto:frers-list-admin@lists.frers33.com"
target=3D"_blank">frers-list-admin@lists.frers33.com</a></font>=20
<p><font face=3D"sans-serif" size=3D"1">14-Jan-2009 11:20 PM</font>=20
<table border=3D"1">
<tbody>
<tr valign=3D"top">
<td bgcolor=3D"white">
<div align=3D"center"><font face=3D"sans-serif" size=3D"1">Please =
respond
to<br><a href=3D"mailto:frers-list@lists.frers33.com"
target=3D"_blank">frers-list@lists.frers33.com</a></font></div></td></tr>=
<
/tbody></table>
<p><font face=3D"sans-serif" size=3D"1">Message Size: <b>6.5 =
KB</b></font>
</p>
<td width=3D"59%">
<table width=3D"100%">
<tbody>
<tr valign=3D"top">
<td>
<div align=3D"right"><font face=3D"sans-serif" =
size=3D"1">To</font></div>
<td><font face=3D"sans-serif" size=3D"1"><a
href=3D"mailto:frers-list@lists.frers33.com"
target=3D"_blank">frers-list@lists.frers33.com</a></font>=20
<tr valign=3D"top">
<td>
<div align=3D"right"><font face=3D"sans-serif" =
size=3D"1">cc</font></div>
<td>
<tr valign=3D"top">
<td>
<div align=3D"right"><font face=3D"sans-serif" =
size=3D"1">Subject</font></div>
<td><font face=3D"sans-serif" size=3D"1">Re: [frers-list]Head Sliding
Door</font></td></td></tr></td></td></tr></td></td></tr></tbody></table>
<br>
<table>
<tbody>
<tr valign=3D"top">
<td>
<td></td></td></tr></tbody></table><br></td>
<td><p></p>
<p></p></td></p></td></tr></tbody></table><br><br><br><font
size=3D"3">Rod,</font> <br><font size=3D"3"> </font> <br><font
size=3D"3">I am almost positive it is a thin paneled door - think of the
weight savings! Afraid I don't have any pics, but will
probably open the boat up in March. If you don't have better
info by then, remind me at the end of March and I'll try to get as
much info to you as possible.</font> <br>
<font size=3D"3"> </font> <br><font size=3D"3">Hmm, does it have a
latch? Frankly I don't remember there being one.
Door's closed - stay out!</font> <br><font
size=3D"3"> </font> <br><font size=3D"3">Art<br><br>----- Original
Message -----<br>
From: rod stright <br>Date: Tuesday, January 13, 2009 6:35
pm<br>Subject: [frers-list]Head Sliding Door<br>To: <a
href=3D"mailto:frers-list@lists.frers33.com"
target=3D"_blank">frers-list@lists.frers33.com</a><br><br>> Hi
Guys,<br>
> <br>> Need to replace the head door. Unfortunately there is not
one <br>> there to go by. Judging from the track it is a sliding
door. <br>> Does anyone happen to have a photo of one or can you
provide a <br>
> good description. I assume it is simply a 1/2" piece of teak
<br>> plywood with a mortised in latch but I'm not sure having
never <br>> seen one. I doubt there is any frame around it but
can't be <br>
> sure as it could be a thin panel door.<br>> <br>> Rod
Stright<br>> 902-444-0016<br>> 902-209-0829(C)<br>>
</font><br></blockquote></div><br>
------=3D_Part_17872_13112436.1232028658494--
--__--__--
Message: 6
Date: Fri, 16 Jan 2009 10:12:09 -0400
From: rod stright <strightr@eastlink.ca>
To: frers-list@lists.frers33.com
Subject: [frers-list]Frers 33 Head Door Ratings Etc.
Reply-To: frers-list@lists.frers33.com
This is a multi-part message in MIME format.
--Boundary_(ID_uNFxIQv3UUlsM+bLAt7ebQ)
Content-type: text/plain; charset=3Diso-8859-1
Content-transfer-encoding: 7BIT
Thanks for the response Guys. I have purchased Equinox. Found the Perko
latch but no door. =20
They will be assigning a rating to the boat up here in Nova Scotia next
week. Since it is -25 degrees C I won't be sailing anytime soon. I
notice the ratings vary a bit by area from 108 to 114. How do you guys
feel about your rating and what is fair? My observation from outside
the area is that where the boats race or raced one-design they are rated
slightly faster since they are competing against similar boats they are
probably better tuned then when they race PHRF they do better, where
there aren't as many they don't do as well and the rating is slower.
Correct?
I also notice there a couple of boats with higher rigs around Long
Island as I recall. =20
Anyway, I'll be on my own up here racing in with wide cross section of
boats so any racing/tuning information would be appreciated.
May need a headstay and foil/furler as the one I have has been broken,
any suggestions. Also a mainsail cover to get started.
Regards
Rod Stright
902-444-0016
902-209-0829(C)
--Boundary_(ID_uNFxIQv3UUlsM+bLAt7ebQ)
Content-type: text/html; charset=3Diso-8859-1
Content-transfer-encoding: 7BIT
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META http-equiv=3DContent-Type content=3D"text/html; =
charset=3Diso-8859-1">
<META content=3D"MSHTML 6.00.6000.16788" name=3DGENERATOR>
<STYLE></STYLE>
</HEAD>
<BODY bgColor=3D#ffffff>
<DIV><FONT color=3D#000080 size=3D2>Thanks for the response Guys. =
I
have=20
purchased Equinox. Found the Perko latch but no door.
</FONT></DIV>
<DIV><FONT color=3D#000080 size=3D2></FONT> </DIV>
<DIV><FONT color=3D#000080 size=3D2>They will be assigning a rating to =
the
boat up=20
here in Nova Scotia next week. Since it is -25 degrees C I won't
be=20
sailing anytime soon. I notice the ratings vary a bit by area from
108 to=20
114. How do you guys feel about your rating and what is
fair? My=20
observation from outside the area is that where the boats race or raced=20
one-design they are rated slightly faster since they are competing
against=20
similar boats they are probably better tuned then when they race PHRF
they do=20
better, where there aren't as many they don't do as well and the rating
is=20
slower. Correct?</FONT></DIV>
<DIV><FONT color=3D#000080 size=3D2></FONT> </DIV>
<DIV><FONT color=3D#000080 size=3D2>I also notice there a couple of
boats with=20
higher rigs around Long Island as I recall. </FONT></DIV>
<DIV><FONT color=3D#000080 size=3D2></FONT> </DIV>
<DIV><FONT color=3D#000080 size=3D2>Anyway, I'll be on my own up here =
racing
in with=20
wide cross section of boats so any racing/tuning information would be=20
appreciated.</FONT></DIV>
<DIV><FONT color=3D#000080 size=3D2></FONT> </DIV>
<DIV><FONT color=3D#000080 size=3D2>May need a headstay and foil/furler =
as
the one I=20
have has been broken, any suggestions. Also a mainsail cover to
get=20
started.</FONT></DIV>
<DIV><FONT color=3D#000080 size=3D2></FONT> </DIV>
<DIV><FONT color=3D#000080 size=3D2>Regards</FONT></DIV>
<DIV><FONT color=3D#000080 size=3D2></FONT> </DIV>
<DIV><FONT color=3D#000080 size=3D2>Rod=20
Stright<BR>902-444-0016<BR>902-209-0829(C)</FONT></DIV></BODY></HTML>
--Boundary_(ID_uNFxIQv3UUlsM+bLAt7ebQ)--
--__--__--
Message: 7
Date: Fri, 16 Jan 2009 16:08:51 -0800 (PST)
From: FRANCIS ALBERT <fxalbert@prodigy.net>
Subject: Re: [frers-list]Frers 33 Head Door Ratings Etc.
To: frers-list@lists.frers33.com
Reply-To: frers-list@lists.frers33.com
--0-1714360268-1232150931=3D:61187
Content-Type: text/plain; charset=3Diso-8859-1
Content-Transfer-Encoding: quoted-printable
Rod=3D20
=3DA0
I've raced PHRF for a long time=3DA0 i'll send you a note this weekend =
on
wha=3D
t works and what doesn't.
=3DA0
Frank
--- On Fri, 1/16/09, rod stright <strightr@eastlink.ca> wrote:
From: rod stright <strightr@eastlink.ca>
Subject: [frers-list]Frers 33 Head Door Ratings Etc.
To: frers-list@lists.frers33.com
Date: Friday, January 16, 2009, 9:12 AM
Thanks for the response Guys.=3DA0 I have purchased Equinox. Found the
Perko =3D
latch but no door.=3DA0=3D20
=3DA0
They will be assigning a rating to the boat up here in Nova Scotia next
wee=3D
k.=3DA0 Since it is -25 degrees C I won't be sailing anytime soon.=3DA0 =
I
notic=3D
e the ratings vary a bit by area from 108 to 114.=3DA0 How do you guys
feel a=3D
bout your rating and what is fair?=3DA0 My observation from outside the
area =3D
is that where the boats race or raced one-design they are rated slightly
fa=3D
ster since they are competing against similar boats they are probably
bette=3D
r tuned then when they race PHRF they do better, where there aren't as
many=3D
they don't do as well and the rating is slower. Correct?
=3DA0
I also notice there a=3DA0couple of boats with higher rigs around Long
Island=3D
as I recall.=3DA0=3D20
=3DA0
Anyway, I'll be on my own up here racing in with wide cross section of
boat=3D
s so any racing/tuning information would be appreciated.
=3DA0
May need a headstay and foil/furler as the one I have has been broken,
any =3D
suggestions.=3DA0 Also a mainsail cover to get started.
=3DA0
Regards
=3DA0
Rod Stright
902-444-0016
902-209-0829(C)
--0-1714360268-1232150931=3D:61187
Content-Type: text/html; charset=3Dus-ascii
<table cellspacing=3D"0" cellpadding=3D"0" border=3D"0" ><tr><td =
valign=3D"top"
style=3D"font: inherit;"><DIV>Rod </DIV>
<DIV> </DIV>
<DIV>I've raced PHRF for a long time i'll send you a note this
weekend on what works and what doesn't.</DIV>
<DIV> </DIV>
<DIV>Frank<BR><BR>--- On <B>Fri, 1/16/09, rod stright
<I><strightr@eastlink.ca></I></B> wrote:<BR></DIV>
<BLOCKQUOTE style=3D"PADDING-LEFT: 5px; MARGIN-LEFT: 5px; BORDER-LEFT:
rgb(16,16,255) 2px solid">From: rod stright
<strightr@eastlink.ca><BR>Subject: [frers-list]Frers 33 Head Door
Ratings Etc.<BR>To: frers-list@lists.frers33.com<BR>Date: Friday,
January 16, 2009, 9:12 AM<BR><BR>
<DIV id=3Dyiv181986542>
<STYLE></STYLE>
<DIV><FONT color=3D#000080 size=3D2>Thanks for the response Guys. =
I
have purchased Equinox. Found the Perko latch but no door.
</FONT></DIV>
<DIV><FONT color=3D#000080 size=3D2></FONT> </DIV>
<DIV><FONT color=3D#000080 size=3D2>They will be assigning a rating to =
the
boat up here in Nova Scotia next week. Since it is -25 degrees C I
won't be sailing anytime soon. I notice the ratings vary a bit by
area from 108 to 114. How do you guys feel about your rating and
what is fair? My observation from outside the area is that where
the boats race or raced one-design they are rated slightly faster since
they are competing against similar boats they are probably better tuned
then when they race PHRF they do better, where there aren't as many they
don't do as well and the rating is slower. Correct?</FONT></DIV>
<DIV><FONT color=3D#000080 size=3D2></FONT> </DIV>
<DIV><FONT color=3D#000080 size=3D2>I also notice there a couple of
boats with higher rigs around Long Island as I recall.
</FONT></DIV>
<DIV><FONT color=3D#000080 size=3D2></FONT> </DIV>
<DIV><FONT color=3D#000080 size=3D2>Anyway, I'll be on my own up here =
racing
in with wide cross section of boats so any racing/tuning information
would be appreciated.</FONT></DIV>
<DIV><FONT color=3D#000080 size=3D2></FONT> </DIV>
<DIV><FONT color=3D#000080 size=3D2>May need a headstay and foil/furler =
as
the one I have has been broken, any suggestions. Also a mainsail
cover to get started.</FONT></DIV>
<DIV><FONT color=3D#000080 size=3D2></FONT> </DIV>
<DIV><FONT color=3D#000080 size=3D2>Regards</FONT></DIV>
<DIV><FONT color=3D#000080 size=3D2></FONT> </DIV>
<DIV><FONT color=3D#000080 size=3D2>Rod
Stright<BR>902-444-0016<BR>902-209-0829(C)</FONT></DIV></DIV></BLOCKQUOT
E></td></tr></table>
--0-1714360268-1232150931=3D:61187--
--__--__--
_______________________________________________
frers-list mailing list
frers-list@lists.frers33.com
http://lists.frers33.com/mailman/listinfo/frers-list
End of frers-list Digest