[frers-list]Sailing Up-wind

Tue, 8 Jun 2004 10:17:50 -0400

This is a multi-part message in MIME format.

------=_NextPart_000_001B_01C44D41.DB1D25B0
Content-Type: text/plain;
	charset="us-ascii"
Content-Transfer-Encoding: 7bit

Before going too far with your weight reduction program, you should take a
good look at the class rules. If you remove or relocate the oven you are
required to carry 40lbs of weight in the space normally occupied by the
oven. There are similar restrictions on other pieces of standard equipment.

http://www.frers33.com/rules/frers33_class_rules.htm

Dave

  _____  

From: frers-list-admin@lists.frers33.com
[mailto:frers-list-admin@lists.frers33.com] On Behalf Of Albert Francis X
NSSC
Sent: Monday, June 07, 2004 9:00 AM
To: 'frers-list@lists.frers33.com'
Subject: RE: [frers-list]Sailing Up-wind

Junius,

I agree, have new sails, Kevlar/Mylar North and UK.  Have a professionally
finished bottom painted with VC Offshore with Teflon and then wet sanded
with 600 until it had a high gloss finish.  Have reduced some weight in the
boat around 100 excess pounds including that big oven/stove which I replaced
with a 2 burner stove only job.  Will look for more to remove from the boat.

One thing that I have that more and more I know is not right is an extender
on the forestay which extends it an additional 5 inches.  This acts to
increase the mast rake and I'm pretty sure Mr. Frers didn't design that into
the boat and Carroll Marine didn't build it into the boat.

Thanks,
Frank 

------=_NextPart_000_001B_01C44D41.DB1D25B0
Content-Type: text/html;
	charset="us-ascii"
Content-Transfer-Encoding: quoted-printable

<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML xmlns=3D"http://www.w3.org/TR/REC-html40" xmlns:v =3D=20
"urn:schemas-microsoft-com:vml" xmlns:o =3D=20
"urn:schemas-microsoft-com:office:office" xmlns:w =3D=20
"urn:schemas-microsoft-com:office:word"><HEAD><TITLE>Message</TITLE>
<META http-equiv=3DContent-Type content=3D"text/html; =
charset=3Dus-ascii">
<META content=3DWord.Document name=3DProgId>
<META content=3D"MSHTML 6.00.2800.1400" name=3DGENERATOR>
<META content=3D"Microsoft Word 9" name=3DOriginator><LINK=20
href=3D"cid:filelist.xml@01C44C6D.AF98A7E0" rel=3DFile-List><!--[if gte =
mso 9]><xml>
 <o:OfficeDocumentSettings>
  <o:DoNotRelyOnCSS/>
 </o:OfficeDocumentSettings>
</xml><![endif]--><!--[if gte mso 9]><xml>
 <w:WordDocument>
  <w:Zoom>0</w:Zoom>
  <w:DocumentKind>DocumentEmail</w:DocumentKind>
  <w:EnvelopeVis/>
 </w:WordDocument>
</xml><![endif]-->
<STYLE>@font-face {
	font-family: Tahoma;
}
@page Section1 {size: 8.5in 11.0in; margin: 1.0in 1.25in 1.0in 1.25in; =
mso-header-margin: .5in; mso-footer-margin: .5in; mso-paper-source: 0; }
P.MsoNormal {
	FONT-SIZE: 12pt; MARGIN: 0in 0in 0pt; FONT-FAMILY: "Times New Roman"; =
mso-style-parent: ""; mso-pagination: widow-orphan; =
mso-fareast-font-family: "Times New Roman"
}
LI.MsoNormal {
	FONT-SIZE: 12pt; MARGIN: 0in 0in 0pt; FONT-FAMILY: "Times New Roman"; =
mso-style-parent: ""; mso-pagination: widow-orphan; =
mso-fareast-font-family: "Times New Roman"
}
DIV.MsoNormal {
	FONT-SIZE: 12pt; MARGIN: 0in 0in 0pt; FONT-FAMILY: "Times New Roman"; =
mso-style-parent: ""; mso-pagination: widow-orphan; =
mso-fareast-font-family: "Times New Roman"
}
P.MsoAutoSig {
	FONT-SIZE: 12pt; MARGIN: 0in 0in 0pt; FONT-FAMILY: "Times New Roman"; =
mso-pagination: widow-orphan; mso-fareast-font-family: "Times New Roman"
}
LI.MsoAutoSig {
	FONT-SIZE: 12pt; MARGIN: 0in 0in 0pt; FONT-FAMILY: "Times New Roman"; =
mso-pagination: widow-orphan; mso-fareast-font-family: "Times New Roman"
}
DIV.MsoAutoSig {
	FONT-SIZE: 12pt; MARGIN: 0in 0in 0pt; FONT-FAMILY: "Times New Roman"; =
mso-pagination: widow-orphan; mso-fareast-font-family: "Times New Roman"
}
SPAN.EmailStyle15 {
	COLOR: navy; mso-style-type: personal-reply; mso-ansi-font-size: =
10.0pt; mso-ascii-font-family: Arial; mso-hansi-font-family: Arial; =
mso-bidi-font-family: Arial
}
DIV.Section1 {
	page: Section1
}
</STYLE>
<!--[if gte mso 9]><xml>
 <o:shapedefaults v:ext=3D"edit" spidmax=3D"1027"/>
</xml><![endif]--><!--[if gte mso 9]><xml>
 <o:shapelayout v:ext=3D"edit">
  <o:idmap v:ext=3D"edit" data=3D"1"/>
 </o:shapelayout></xml><![endif]--></HEAD>
<BODY lang=3DEN-US style=3D"tab-interval: .5in" bgColor=3Dwhite>
<DIV dir=3Dltr align=3Dleft><FONT face=3DArial color=3D#0000ff =
size=3D2><SPAN=20
class=3D376391214-08062004>Before going too far with your weight =
reduction=20
program, you should take a good look at the class rules. If you remove =
or=20
relocate the oven you are required to carry 40lbs of weight in the space =

normally occupied by the oven. There are similar restrictions on other =
pieces of=20
standard equipment.</DIV>
<DIV dir=3Dltr align=3Dleft><SPAN=20
class=3D376391214-08062004>&nbsp;</DIV>
<DIV dir=3Dltr align=3Dleft><SPAN=20
class=3D376391214-08062004><A=20
href=3D"http://www.frers33.com/rules/frers33_class_rules.htm">http://www.=
frers33.com/rules/frers33_class_rules.htm</A></DIV>
<DIV dir=3Dltr align=3Dleft><SPAN=20
class=3D376391214-08062004>&nbsp;</DIV>
<DIV dir=3Dltr align=3Dleft><SPAN=20
class=3D376391214-08062004>Dave</DIV> 
<BLOCKQUOTE dir=3Dltr=20
style=3D"PADDING-LEFT: 5px; MARGIN-LEFT: 5px; BORDER-LEFT: #0000ff 2px =
solid; MARGIN-RIGHT: 0px">
 <DIV class=3DOutlookMessageHeader lang=3Den-us dir=3Dltr align=3Dleft>
 <HR tabIndex=3D-1>
 From: =
frers-list-admin@lists.frers33.com=20
 [mailto:frers-list-admin@lists.frers33.com] On Behalf Of Albert =
Francis=20
 X NSSC Sent: Monday, June 07, 2004 9:00 AM To:=20
 'frers-list@lists.frers33.com' Subject: RE: =
[frers-list]Sailing=20
 Up-wind </DIV>
 <DIV></DIV>
 <DIV class=3DSection1>
 <SPAN=20
 style=3D"FONT-SIZE: 10pt; FONT-FAMILY: Arial; mso-bidi-font-size: =
12.0pt">Junius,<o:p></o:p>
 <SPAN=20
 style=3D"FONT-SIZE: 10pt; FONT-FAMILY: Arial; mso-bidi-font-size: =
12.0pt"><![if =
!supportEmptyParas]><![endif]>&nbsp;<o:p></o:p>
 <SPAN=20
 style=3D"FONT-SIZE: 10pt; FONT-FAMILY: Arial; mso-bidi-font-size: =
12.0pt">I=20
 agree, have new sails, Kevlar/Mylar North and UK.<SPAN=20
 style=3D"mso-spacerun: yes">&nbsp; Have a professionally =
finished bottom=20
 painted with VC Offshore with Teflon and then wet sanded with 600 =
until it had=20
 a high gloss finish.&nbsp; =
Have reduced=20
 some weight in the boat around 100 excess pounds including that big =
oven/stove=20
 which I replaced with a 2 burner stove only job.<SPAN=20
 style=3D"mso-spacerun: yes">&nbsp; Will look for more to remove =
from the=20
 boat.<o:p></o:p>
 <SPAN=20
 style=3D"FONT-SIZE: 10pt; FONT-FAMILY: Arial; mso-bidi-font-size: =
12.0pt"><![if =
!supportEmptyParas]><![endif]>&nbsp;<o:p></o:p>
 <SPAN=20
 style=3D"FONT-SIZE: 10pt; FONT-FAMILY: Arial; mso-bidi-font-size: =
12.0pt">One=20
 thing that I have that more and more I know is not right is an =
extender on the=20
 forestay which extends it an additional 5 inches.<SPAN=20
 style=3D"mso-spacerun: yes">&nbsp; This acts to increase the =
mast rake=20
 and I&#8217;m pretty sure Mr. Frers didn&#8217;t design that into the =
boat and Carroll=20
 Marine didn&#8217;t build it into the =
boat.<o:p></o:p>
 <SPAN=20
 style=3D"FONT-SIZE: 10pt; FONT-FAMILY: Arial; mso-bidi-font-size: =
12.0pt"><![if =
!supportEmptyParas]><![endif]>&nbsp;<o:p></o:p>
 <SPAN=20
 style=3D"FONT-SIZE: 10pt; FONT-FAMILY: Arial; mso-bidi-font-size: =
12.0pt">Thanks,<o:p></o:p>
 <SPAN=20
 style=3D"FONT-SIZE: 10pt; FONT-FAMILY: Arial; mso-bidi-font-size: =
12.0pt">Frank=20
 <o:p></o:p>
 <SPAN=20
 style=3D"FONT-SIZE: 10pt; FONT-FAMILY: Arial; mso-bidi-font-size: =
12.0pt"><![if =
!supportEmptyParas]><![endif]>&nbsp;<o:p></o:p><=
![if !supportEmptyParas]><![endif]><![if =
!supportEmptyParas]><![endif]><![if =
!supportEmptyParas]><![endif]></DIV></BLOCKQUOTE></BODY></HTML>

------=_NextPart_000_001B_01C44D41.DB1D25B0--